Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Search
Arcade
Chatroom
Calendar
Media
Login
Register
PebHmong Discussion Forum
»
General Category
»
General Discussion
»
After 14 years, it's time for new boots
Advertisement
Print
Pages: [
1
]
Author
Topic: After 14 years, it's time for new boots (Read 680 times)
0 Members and 1 Guest are viewing this topic.
theking
Elite Poster
Posts: 59704
Respect:
+1334
After 14 years, it's time for new boots
«
on:
August 05, 2019, 10:43:47 PM »
:
I put some tape around the spline and grease it a little to prevent the new boot from scratches as I push the axle rod through it. Then once done, take the tape off:
Lube the spline and install the tulip back on:
New boot on and tulip installed, ready to punch the axle through the spindle and hub and connect the tulip back with the stub:
Glad I have this bad boy for the axle nut because it requires 173 Ft/Lbs of torque
:
Like this post:
0
Logged
Adverstisement
theking
Elite Poster
Posts: 59704
Respect:
+1334
Re: After 14 years, it's time for new boots
«
Reply #1 on:
August 06, 2019, 09:39:01 PM »
Also replaced the crimp type CV boot bands with these special made hose clamps for a tighter clamp and easier future removal
:
Like this post:
0
Logged
Print
Pages: [
1
]
PebHmong Discussion Forum
»
General Category
»
General Discussion
»
After 14 years, it's time for new boots
Advertisements