Advertisement

Author Topic: bass fishing  (Read 485832 times)

0 Members and 3 Guests are viewing this topic.

basside

  • Guest
Re: bass fishing
« Reply #1950 on: April 22, 2011, 10:49:55 AM »
Are you all doing Lake Menomin then? Anyone gonna pre-fish? I'm probably just going to wing it. Looks like a fun lake.

Anyone been there before?

No meno for me. Vacation that week. I'm going to Florida with the wife and kids for 1 week. I might send my rods to our hotel and fish one day. Uncertain since I did that last year on Lake Kissame and caught 6lb--I know, weak but this year we're taking the kids so there might not be any fishing trips. 

I plan to fish TCHB and HBC Elite this year. If you fish meno, good luck!



Like this post: 0

Adverstisement

Gym -E- Lamm

  • Guest
Re: bass fishing
« Reply #1951 on: April 22, 2011, 11:38:24 AM »
Are you all doing Lake Menomin then? Anyone gonna pre-fish? I'm probably just going to wing it. Looks like a fun lake.

Anyone been there before?

I want to but we will see. it'll be a 120 mile round trip while towing the boat.


So 120 * 2 = 240 miles at 12mpg = A lot of gas plus gas for boat plus 140 to fish....LOLtha t's like a 350 dollar tourney...LOL



Like this post: 0

Photocycle

  • Guest
Re: bass fishing
« Reply #1952 on: April 22, 2011, 11:41:08 AM »
I want to but we will see. it'll be a 120 mile round trip while towing the boat.


So 120 * 2 = 240 miles at 12mpg = A lot of gas plus gas for boat plus 140 to fish....LOLtha t's like a 350 dollar tourney...LOL

Yep... but I think that's a little closer than pool 4...



Like this post: 0

ricqik

  • Guest
Re: bass fishing
« Reply #1953 on: April 22, 2011, 10:00:21 PM »
lol welcome back Riq!!!
phocy, just in case ure wondering

i'm using the power-pole bracket for my talon. my power-pole p/n is pk-s-7-5-p, bought it thru hydrilla. bracket does not come with bolts, u gotta buy them separate.

motor full left sitting level, clearance between talon whole motor


motor full left tilted, clearance between talon n bottom of cowl


motor full left tilted, clearance between talon n top of cowl


side view, clearance between sponson n bracket


top view, clearance between sponson n bracket


rear view of talon 4" above bottom of hull



Like this post: 0

Photocycle

  • Guest
Re: bass fishing
« Reply #1954 on: April 23, 2011, 12:52:47 AM »
Nice Riq... well? what do u think so far? u go test her out yet?



Like this post: 0

blablablablabla

  • Guest
Re: bass fishing
« Reply #1955 on: April 23, 2011, 09:09:00 AM »
riq it looks good.  O0  but them bolts that go on talon to plate is too long.  ;D  You also might want to open it up and extend the wire.  Mine seems to have crappy reception for deployment.  This helped



Jason, talon works great.  I've had mine in very swift current.  If you look at the picture lots and lots of current.  Talon held up very well in 6fow.  




Riq, ITS ON FIRE!!!!  Two boats, loaded 60 in about 5 hours.  you know what i'm talking about.  O0


« Last Edit: April 23, 2011, 09:12:01 AM by blablablablabla »

Like this post: 0

Photocycle

  • Guest
Re: bass fishing
« Reply #1956 on: April 23, 2011, 09:15:15 AM »
Damn it...



Like this post: 0

blablablablabla

  • Guest
Re: bass fishing
« Reply #1957 on: April 23, 2011, 09:18:05 AM »
Jason, you gonna go out tomorrow?



Like this post: 0

Photocycle

  • Guest
Re: bass fishing
« Reply #1958 on: April 23, 2011, 09:22:09 AM »
Jason, you gonna go out tomorrow?

Tomorrow? I'm getting ready to head out within 1-2 hrs lol... The St Croix would be nice but it's quite a ways from where I am. I don't want to splurge too much gas $$$ yet... was thinking about hitting up medicine or tonka to scan around and hit some pan fish/crappie if possible...



Like this post: 0

Photocycle

  • Guest
Re: bass fishing
« Reply #1959 on: April 23, 2011, 09:24:13 AM »
So the bite is on for St Croix then? .... hmmmmmmm... sounds tempting...



Like this post: 0

blablablablabla

  • Guest
Re: bass fishing
« Reply #1960 on: April 23, 2011, 09:25:14 AM »
have fun out there. O0  was gonna head out to the river today but it looks a bit cold.   ;D  have fun filling up the boat n truck   :idiot2:   O0



Like this post: 0

blablablablabla

  • Guest
Re: bass fishing
« Reply #1961 on: April 23, 2011, 09:27:15 AM »
So the bite is on for St Croix then? .... hmmmmmmm... sounds tempting...

its on.  but you have to figure them out.  had a few boat out yesterday didn't catch squat and left.  We pounded them.   O0

you'll catch them in small schools, a few here a few there.  They just inhale it.  fish were caught on anything that we threw.   O0

btw, its still no wake on the entire river.  But I had to test my hotfoot n blinker trim i just put in.   O0


« Last Edit: April 23, 2011, 09:33:36 AM by blablablablabla »

Like this post: 0

ricqik

  • Guest
Re: bass fishing
« Reply #1962 on: April 23, 2011, 11:39:40 AM »
The bolts just for pic purposes. Gonna get new bolts. Still r&d a way to block the nuts n bolts from theft. 



Like this post: 0

Photocycle

  • Guest
Re: bass fishing
« Reply #1963 on: April 25, 2011, 08:55:47 AM »
Will, how did the remainder of the Sunday go?








Like this post: 0

basside

  • Guest
Re: bass fishing
« Reply #1964 on: April 25, 2011, 09:49:03 AM »
Photo, guess you went to the river instead of tonka. It was a very nice day on Sunday! No wake rule still in effect? Boomsite have launch dock up yet?



Like this post: 0

 

Advertisements